|
SKC Passive Sampling Guide
| Chemical Hazard |
CAS No. |
Sampler
|
Validation
Level |
Analytical Method
|
|
Formaldehyde
|
50-00-0
|
500-100 UMEX100 Passive Sampler for Formaldehyde
|
|
HPLC-UV — High-performance Liquid Chromatography With UV
|
|
Formaldehyde
|
50-00-0
|
500-100 UMEX100 Passive Sampler for Formaldehyde
|
|
HPLC-UV — High-performance Liquid Chromatography With UV
|
|
Formaldehyde
|
50-00-0
|
500-100 UMEX100 Passive Sampler for Formaldehyde
|
|
HPLC-UV — High-performance Liquid Chromatography With UV
|
|
Formaldehyde
|
50-00-0
|
526-100 Indoor Air Formaldehyde Area Sampler Kit
|
|
VAS — Visible Absorption Spectrophotometry
|
|
Formaldehyde
|
50-00-0
|
526-200 Personal Formaldehyde Passive Sampler, STEL model
|
|
VAS — Visible Absorption Spectrophotometry
|
|
Formaldehyde
|
50-00-0
|
526-201 Personal Formaldehyde Passive Sampler, PEL model
|
|
VAS — Visible Absorption Spectrophotometry
|
|
Formaldehyde
|
50-00-0
|
810-91D Gastec Color Dosimeter Tube
|
|
DR — Direct Reading
|
|
Formic acid
|
64-18-6
|
810-81D Gastec Color Dosimeter Tube
|
|
DR — Direct Reading
|
|
Furfural
|
98-01-1
|
690-101 Ultra III Passive Sampler, GCB1 or
690-104 Ultra III Passive Sampler, Tenaz TA
|
|
TD, GC — Thermal Desorption - Gas Chromatography
|
|
Furfural
|
98-01-1
|
810-91D Gastec Color Dosimeter Tube
|
|
DR — Direct Reading
|
Chemical Hazards by First Letter
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.
|