SKC Inc. The World Leader in Sampling Technologies
  Headlines: New! SKC Webinars/Podcast
 Facebook Page button    Youtube button

Deal of the Month. Special pricing Click Here
SKC celebrates Tedlar return
SKC Connect button
SKC Feature Video

SKC Passive Sampling Guide for Vinyl acetate

Chemical Hazard CAS No.
Vinyl acetate 108-05-4
Agency Standards
  OSHA C/STEL(ppm) ACGIH TLV (ppm)
  4 (C)# 10
Sampling Parameters
Sampling Rate (ml/min) Minimum Sampling Time (min) Maximum Sampling Time (hrs)
16.3 30 8
Analytical Method
GC-FID — Gas Chromatography-Flame Ionization Detector
Desorption Efficiency % Desorption Solvent
92 Carbon disulfide (2 ml)
SKC Equipment
575-002 Passive Sampler for Organic Vapor, Anasorb 747 sorbent  
Validation Type
Full
Passive monitor has passed all NIOSH protocol validation requirements for sampling rate, desorption efficiency, humidity effects, reverse diffusion, storage stability test for reactive compounds whose stability is suspect , and a factorial study that includes interfering compounds. This is the most rigorous test possible and includes all parameters that can affect sampling accuracy (formerly referred to as Level 5).
Footnotes
# - NIOSH STEL level
printer friendly page
Chemical Hazard Search:
  Enter chemical name in box above
Catalog Number Search:
  Enter the catalog number in box above
CAS Number Search:
  Enter the CAS number in box above

Chemical Hazards by First Letter

A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.

 
  About SKC Terms of Use Privacy Policy Contact Us Site Map Ordering Information
This site was last modified May 23, 2013
SKC Inc.'s Quality Policy is in Compliance with IS0 9001-2008
© Copyright 1995-2013 SKC Inc.