chek-mate Flowmeter w/CalChek, 5.0-30 L/Min, w/NIST Cert, Kit

Part Number:

375-50300-KN

- +
Overview
High Flow chek-mate® Flowmeter Kit with CalChek®, 5 to 30 L/min, includes a 9-volt alkaline battery (flowmeter hosetail larger diameter for higher flow pumps), CalChek automatic flow rate verification, pulsation dampener Cat. No. 375-150, and NIST standard traceable calibration certificate.
The Proof is in the Performance! With a volumetric accuracy of 1% of reading, chek-mate is the smart choice for air sampling pump flow rate verification! Now available with CalChek capability for direct communication to CalChek-ready pumps to automatically verify flow at a single flow point or calibrate across a range of flows.
Attributes
TypeElectronic
Flow Measurement Range5 to 30 L/min
Automatic Flow Rate VerificationYes, with SKC CalChek-enabled Leland Legacy® Pump and cable
Calibration CertificateYes
CE MarkedYes
Accuracy±1% of reading 5 to 30 L/min
UKCA MarkedYes

Performance Profile

Flow Measurement Range

Low Flow Chek-mate:
20 to 500 ml/min (volumetric)

Medium Flow Chek-mate:
500 to 5000 ml/min (volumetric)

High Flow Chek-mate:
5 to 30 L/min

Display Resolution0.001 L/min
Accuracy

Low Flow Chek-mate:
20-50 ml/min ± 2.5% of reading
50-500 ml/min ± 1% of reading

Medium Flow Chek-mate:
500-750 ml/min ± 2.5% of reading
750 to 5000 ml/min ± 1% of reading

High Flow Chek-mate:
5 to 30 L/min ± 1% of reading

Battery

9-V alkaline primary (disposable) PP3 / 6LR61 / 1604A or equivalent, or
8.4V NiMH secondary (rechargeable) PP3 / 6HR61 / 8.4H5 or equivalent

Automatic power off timer – 15 minutes

Operating Temperature Range32 to 104 F (0 to 40 C)
Operating Barometric Pressure700 mbar to 1090 mbar (20.7 inch Hg to 32.2 inch Hg)
Operating AltitudeSea level to approximately 10,000 ft (3050 m) above sea level
IP Rating (enclosure)IP40
Overall Dimensions
(including hose tail)
7 x 3.3 x 1.3 in (17.8 x 8.4 x 3.3 cm)
WeightModels below 9 ounces (255 grams)
CertificationCE Marked