Skip to the beginning of the images gallery

HD-7204 Kit with PPI Inlet/Sensor

Part Number:

770-7204P

Overview

HAZ-DUST 7204 Monitor Kit with PPI® Inlet/Sensor includes monitor with battery, PPI® (without filter), flow adapter, zero accessory, universal battery charger (100-240 V) with adapters, DustComm Pro Software and manual on USB, and micro-USB download cable, in a hard carry case. Requires calibration with equipment sold separately.

Details

The Environmental Devices Corporation personal HD-7204 provides immediate identification of problem areas and tasks. Quickly implement controls to reduce exposures to hazardous particulate and then measure the effectiveness of controls moving forward. There's no further need for two co-located devices – one HAZ-DUST 7204 with built-in compensating pump and pre-weighed filter cassette simultaneously provides real-time particulate readout and gravimetric sampling. The HAZ-DUST 7204 alerts users of approaching thresholds for immediate corrective action. Designed carefully with you in mind, the HAZ-DUST 7204 provides cost-savings and the widest range, lowest detection, and best resolution of any personal dust monitor on the market.

Attributes

Attributes
Manufacturer	Environmental Devices Corporation
Type	Personal Dust/Silica Dust
Flow Rate	1-5 L/min, user selectable
Particle Size Range	0.1 to 100 µm
Sensing Range	0.001 to 500 mg/m³
Simultaneous Gravimetric Sampling	Yes
Infield Calibration Verification	Yes
Datalogging	Yes
Connectivity	Optional wireless, Bluetooth, cellular, and networking capabilities available

Specifications

HD-7204 Specifications

Sensors	Sensor Type: 90° light scattering 880nm Calibration: Calibrated against Gravimetric reference NIST traceable- SAE fine test dust ISO12103-1 A2 Fine Test Dust. Accuracy: +/- 10% to filter gravimetric SAE fine test dust Precision: +/- 0.002 mg/m3 or 2 µg/m3 Sensing Range: 0.001-500 mg/m 3 or 1-500,000 µg/m³ PM Size Range: 0.1 to 100um Minimum Resolution: 1 ug/m³ (0.001 mg/m³ ) Zero Stability: +/- 0.001 mg/m³ (give µg/m³ equivalent also) over 24 hours using 10 second log rate. Humidity: 95% non-condensing
Display	3.5”, 24-bit True color, Resistive Color Touch, with Auto Dimming
Real-Time Data Display	Time: Hours, min., sec., 12hour & 24 hour Date: MM/DD/YYYY, YY/MM/DD, DD/MM/YY Data Display: Concentrations (mg/m³ , µg/m³), Sampling Size Fraction of PM (OSHA TWA, AVG., MAX., MIN.), Start time, stop time, elapsed run time, Log rate, Flow, Real-Time Rolling Graphs (10 sec and 1 second), Personalized Named Data Sets, Unique Aerosol Profiles, Language Options, Battery Life Pump Faults, Flow Rate, Infield Calibration Test, History of Data Sets
Sampling Flow Rate	Sampling Flow Rate:1-5 Lpm The pump is capable to maintain flow within ±5% as follows: 1.0 Lpm up to 70 Inch H₂O; 2.5 Lpm up to 55 Inch H₂O, and 5.0 Lpm up to 20 inch H₂O.
Filter Cassette	37mm preloaded and weighted filter cassette 37mm 1um jeweled cassette for diesel particulates 25mm Preloaded cassette
Attachable Inlets
Respirable Inlet	GS-3 Cyclone: 2.75 LPM for 4µm cut point (OSHA silica rule) Meets ISO 7708/CEN criteria GS-1 Cyclone: 2.0LPM for 4µm cut point (OSHA silica rule) 3 LPM for 3.5 cut point (MSHA silica standard) 1.7 or 2.0 LPM with DPM cassette (MSHA DPM sampling) Meets ISO 7708/CEN criteria
Inhalable Inlet	IOM sampler: 2.0 LPM Meets ISO 7708/CEN criteria
Thoracic Inlet	Thoracic Sampling Inlet: 2.0LPM
Impactors	PM10, PM5.0, PM4.0, PM2.5

Alarm Output	Audible & Visual Audible: 90db at 3ft Ceiling and S.T.E.L Alarms, Pump Fail, and Low Battery
Recording Time	1 second to 15 days Sampling Rate: 1 sec., 4 sec., 10 sec., and 60 sec
Data Storage	43,200 data points
Memory & Time Storage	>5 years
Digital Output	Micro USB 6.00’ (1.83m), A Male to Micro B Male, 28SWG, Shielded
Power Supply	Wall Mount, Multi Bald Included, Voltage Input 100~240 VAC, Voltage Output 12V, Current Output 2A, CE, UL,CB, cUL, PSE, RCM
Battery	Lithium Ion pack, 7.4 Volt 3350 mAh, 24.79 watts
Operating Time	22+ hours Running at 2.0LPM with IOM and no filter.
Operating & Storing Conditions	Operating Temperature: 0 to 50°C Storage Temperature: -20 to 70°C Operational Humidity: 0-95% Non-Condensing
DUSTCOMM Pro Software	Windows™ driven Windows 10 or greater
Maintenance	Zero Calibration: Before each use In Field Calibration Verification: Before each use Flow Calibration: Before each use. Will automatically change when switching PM selective size. Sensor Cleaning: By user when needed/ or during annual calibration Factory Calibration: Annually or when instrument fails infield calibration verification.
Weight and Dimensions	Dimensions (Case): 3.5” x 2.25” x 4.75” Sensor Dimensions: 1.75” x 1.5” Weight Instrument: 1.14lbs Weight Sensor: 0.6lbs Display dimensions: 3.5”
PM Sensor	Sensor Type: 90° light scattering 88nm Calibrated against Gravimteric reference NIST traceable-SAE fine test dust ISO12103-1 A2 Fine Test Dust.
Tripod Mounting	Optional Accessory