SKC EPA Sampling Guide for Pesticides
| Chemical Information | |
Pesticides | GC-ECD |
| Sampling Parameters | |
Indoor 1-5 L/min | 4-24 hrs |
| Important Information Outdoor sampling rates are shown. |
SKC Sampling Equipment
Low-volume PUF Tube, 22 x 100-mm size, 76mm PUF, 1 sectionPart Number: 226-92$43.00 /EALow-volume PUF Tube, Polyurethane Foam (PUF), 76 mm, 1 section packed in a 22 x 100-mm size glass tube; for EPA TO-10A, IP-8, ASTM D4861. Tube Ends: Glass Open
Low-volume PUF Tube, PUF/Tenax/PUF, 22 x 100-mm size, 3 sections, 30mm PUF/750 mg sorbent (60/80 mesh)/30mm PUFPart Number: 226-124$116.00 /EALow-volume PUF/Sorbent Tube, PUF/Tenax/PUF, 3 sections, 30 mm PUF x 750 mg sorbent (60/80 mesh) x 30 mm PUF packed in a 22 x 100-mm size glass tube; for ASTM D4861 and EPA TO-10A Tube Ends: Glass Open
This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.
Validate your login