SKC HSE Sampling Guide for p-Aramid respirable fibres

SKC HSE Sampling Guide for p-Aramid respirable fibres
Chemical Information
Aramid respirable fibres
26125-61-1
PCM
MDHS 87
Sampling Parameters

TWA 0.5 fibres/ml

Refer to method

SKC Sampling Equipment

Filter:
  1. Filter, MCE w/o Support Pad, w/Black Grid, 0.80 µm, 25mm, 100Pk
    Part Number: 225-1913
    $42.95 /PK
    MCE Filters, 0.8 µm, 25-mm, with black grid, no support pad included.

This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.