SKC HSE Sampling Guide for Bromine

SKC HSE Sampling Guide for Bromine
Chemical Information
Bromine
7726-95-6
IC
NIOSH 6011
Sampling Parameters

TWA 0.1 ppm (0.66 mg/m3)
C/STEL 0.2 ppm (1.3 mg/m3)

250
15

1000
1000

4
15

SKC Sampling Equipment

Coated Filter in Preloaded Cassette:
  1. Coated Filter Cassette, 1 PTFE pre-filter, 1 specially cleaned Silver Membrane w/Porous Polyethylene Support, 25mm, 2-Piece Black Conductive Goblet Style Cassette, Banded, 5Pk
    Part Number: 225-9006
    $244.00 /PK
    Coated Filters, 1 PTFE pre-filter and polypropylene support, 1 specially cleaned silver membrane and polypropylene support, preloaded in a 25-mm cassette, for sampling bromine, chlorine.
Filter Cassette and Cyclone Holder:
  1. Filter Cassette Holder
    Part Number: 225-1
    $33.00 /EA
    Filter Cassette Holder, accommodates two or three-piece 25 or 37-mm cassettes with or without a cyclone, clips to a worker's collar; includes 3 feet of 1/4-inch ID Tygon tubing and 25-mm adapter ring.

This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.