SKC HSE Sampling Guide for Turpentine

SKC HSE Sampling Guide for Turpentine
Chemical Information
Turpentine
8006-64-2
GC-FID
NIOSH 1551
Sampling Parameters

TWA 100 ppm (566 mg/m3)
C/STEL 150 ppm (850 mg/m3)

10

20(50)

8(3.3)

SKC Sampling Equipment

Sorbent Tube:
  1. Sorbent Tubes, Anasorb CSC, Coconut Charcoal, pk/50
    Part Number: 226-01
    $50.00 /PK

    SKC offers a complete selection of sorbent tubes designed specifically for solvent extraction specified in many OSHA, NIOSH, ASTM, EPA, and non-agency methods. Quality SKC Sorbent Tubes feature consistent sorbent mesh size, validation, and over 45 years of proven performance.

This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.