SKC OSHA / NIOSH Sampling Guide for Lead (in dust wipes)
| Chemical Information | ||
Lead (in dust wipes) 7439-92-1 | SPOT | 2µg /sample by flame AAS. 0.1µg /sample by graphite furnace AAS |
| Sampling Parameters | |||
TWA | Wipe | ||
SKC Sampling Equipment
Full Disclosure Lead Wipe Kit, QualitativePart Number: 550-001$71.00 /EAFull Disclosure® Kit for Qualitative Analysis includes 11 pairs of nitrile gloves, 10 wipes, Disclosing Powder, extraction solution, deionized water, 10 sheets of waxed paper, and instructions; not designed for detecting lead in paint and paint chips, on painted surfaces, or embedded in material such as plastic; not suitable for lead chromate; wipes in kit conform to ASTM E1792.
Full Disclosure Lead Wipe Kit, QuantitativePart Number: 550-002$85.00 /EAFull Disclosure® Kit for Quantitative Analysis includes 11 pairs of nitrile gloves, 10 wipes, Disclosing Powder, extraction solution, deionized water, 10 sheets of waxed paper, instructions, 10 sample collection bottles with labels, and 10 disposable templates; not designed for detecting lead in paint and paint chips, on painted surfaces, or embedded in material such as plastic; not suitable for lead chromate; wipes in kit conform to ASTM E1792.
This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.
Validate your login