SKC OSHA / NIOSH Sampling Guide for Mercaptans (see specific compounds)
| Chemical Information | ||
Mercaptans (see specific compounds) | GC-FPD | See specific compounds |
| Sampling Parameters | |||
TWA | 10 @0.5ppm - 150 L | 100 - 200 ml/min | varies |
SKC Sampling Equipment
Coated Filter Cassette, 1 Glass Fiber coated w/Mercuric Acetate, w/o Support Pad, 37mm, 2-Piece Traditional Style Styrene Cassette, Banded, 10PkPart Number: 225-9007$114.00 /PKCoated Filters, 1 Glass filter coated with mercuric acetate, preloaded in a 37-mm cassette, for sampling mercaptans (methyl-, ethyl-, -n-butyl-, phenyl-).
Filter Cassette HolderPart Number: 225-1$33.00 /EAFilter Cassette Holder, accommodates two or three-piece 25 or 37-mm cassettes with or without a cyclone, clips to a worker's collar; includes 3 feet of 1/4-inch ID Tygon tubing and 25-mm adapter ring.
Pocket Pump TOUCH PumpPart Number: 220-1000TC$806.00 /EAPocket Pump® TOUCH with Li-Ion battery and screwdriver. Requires charger. Requires 877-94 to use Bluetooth with PC.
This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.
Validate your login