SKC OSHA / NIOSH Sampling Guide for Glass, fibrous (see asbestos fibers)
| Chemical Information | ||
Glass, fibrous (see asbestos fibers) | PCM | 7 fibers/mm2 filter area |
| Sampling Parameters | |||
TWA 0.1 fbr/cc/400L | varies | varies | varies |
SKC Sampling Equipment
Filter Cassette, MCE BestChek w/Support Pad, 0.80 µm, 25mm, Carbon-Filled Black Polypropylene Cassette w/2-in Spacer Cowl, Banded, 50PkPart Number: 225-321$74.95 /PKBestChek® MCE Filter, 0.8 µm, 25-mm, for asbestos sampling, preloaded in carbon-filled black polypropylene conductive cassette, assembled with 2-inch spacer cowl, for PCM analysis, quality tested for low asbestos background, pre-banded.
Filter Cassette, MCE BestChek w/Support Pad, 0.80 µm, 25mm, Carbon-Filled Black Polypropylene Cassette w/2-in Spacer Cowl, Banded, 50PkPart Number: 225-326$74.95 /PKBestChek® MCE Filter with black grid, 0.8 µm, 25-mm, for asbestos sampling, preloaded in carbon-filled black polypropylene conductive cassette, assembled with 2-inch spacer cowl, for PCM analysis, quality tested for low asbestos background, pre-banded. Certificate of analysis included.
Filter Cassette, MCE BestChek w/Support Pad, 0.80 µm, 25mm, Carbon-Filled Black Polypropylene Cassette w/2-in Spacer Cowl and Stand-Up Plug in Outlet End, Banded, 50PkPart Number: 225-321A$76.95 /PKBestChek® MCE Filter, 0.8 µm, 25-mm, for asbestos sampling, preloaded in carbon-filled black polypropylene conductive cassette, assembled with 2-inch spacer cowl, with stand-up plug in outlet end, for PCM analysis, quality tested for low asbestos background, pre-banded.
Filter Cassette, MCE BestChek w/Support Pad, 0.45 µm, 25mm, Carbon-Filled Black Polypropylene Cassette w/2-in Spacer Cowl, Banded, 50PkPart Number: 225-327$84.95 /PKBestChek® MCE Filter, 0.45 µm, 25-mm, for asbestos sampling, with support and 5.0-µm diffuser pads, preloaded in carbon-filled black polypropylene conductive cassette, assembled with 2-inch spacer cowl, for TEM analysis, quality tested for low asbestos background, pre-banded.
This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.
Validate your login