SKC OSHA / NIOSH Sampling Guide for PAHs (Polynuclear Aromatic Hydrocarbons by GC-MS, see specific compounds)
| Chemical Information | ||
PAHs (Polynuclear Aromatic Hydrocarbons by GC-MS, see specific compounds) | GC-MS | |
| Sampling Parameters | |||
TWA | 350 m3 (max) | 225 L/min | 1 - 24 hr |
SKC Sampling Equipment
High-volume PUF Tube, 65 x 125-mm size, 1 section, 75mm PUFPart Number: 226-131$146.00 /EAHigh-volume PUF Tube, PUF, 1 section, 75-mm, packed in a 65 x 125-mm size glass tube; for EPA IP-7, TO4A, TO-13A, and ASTM D6209. Tube Ends: Glass Open
Filter, Quartz (QM-A) w/o Support Pad, Heat Treated, Binder-Free, 450 µm thick, 102mm, 100PkPart Number: 225-1808$822.00 /PKQuartz (QM-A) Filter, 102 mm, 450 µm thick, heat treated, binder-free, no support pad included; for elemental/organic carbon, DPM, and trace-level contaminants.
This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.
Validate your login