SKC OSHA / NIOSH Sampling Guide for Metal & metalloid particulates (bulk sample)
| Chemical Information | ||
Metal & metalloid particulates (bulk sample) | ICP-AES | see specific metal (element) |
| Sampling Parameters | |||
TWA varies | bulk | ||
| Important Information Refer to method ID125 for a list of metals. Refer to 29 CFR 1910.1000 for current exposure limits. Some metals may require larger air volume for STEL and Ceiling samples. Refer to the method for details Multi-element analysis for 13 metals is |
SKC Sampling Equipment
Ghost Wipes, 1000PkPart Number: 225-2413$285.00 /PKGhost Wipes for sampling metals on surfaces, moistened with deionized water, individually sealed packets, require 10 x 10-cm templates
This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.
Validate your login