SKC OSHA / NIOSH Sampling Guide for Respirable Dust using PPI Samplers
| Chemical Information | ||
Respirable Dust using PPI Samplers | GR & XRD | |
| Sampling Parameters | |||
TWA 50 µg/m3 | 960 L | 2000 ml/min | 8 hr |
SKC Sampling Equipment
Filter, PVC, GLA-5000 w/Support Pad, 5.00 µm, 37mm, 100PkPart Number: 225-5-37-P$99.95 /PKPVC Filter, 5.0 µm, 37-mm, support pad included, GLA-50000.
Parallel Particle Impactor (PPI), Disposable, Respirable, 2 L/min, Filter and Support Pad Not Included, GoldPart Number: 225-385$26.95 /EAThis plastic Disposable PPI® Sampler features four impactors arranged in parallel for precise respirable dust sampling at 2 L/min that meets ISO 7708/CEN respirable criteria. It is preloaded with four porous plastic disc impaction substrates. Requires a user-loaded 37-mm filter and support purchased separately. The gold color identifies it as a 2 L/min respirable model. Single use.
This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.
Validate your login