SKC OSHA / NIOSH Sampling Guide for Glutaraldehyde

SKC OSHA / NIOSH Sampling Guide for Glutaraldehyde
Chemical Information
Glutaraldehyde
111-30-8
HPLC-UV
1.31 ng/injection
Sampling Parameters

TWA
C/STEL


15 L


1000 ml/min


15 min

SKC Sampling Equipment

Coated Filter in Preloaded Cassette:
  1. Coated Filter Cassette, Glass Fiber coated w/2,4-Dinitrophenylhydrazine and Phosphoric Acid, w/o Support Pad, 37mm, 3-Piece Traditional Style Styrene Cassette, Banded, 10Pk
    Part Number: 225-9003
    $130.00 /PK
    Coated Filters, 2 Glass fiber filters coated with 2,4-dinitrophenylhydrazine and phosphoric acid, preloaded in a 37-mm cassette, for sampling glutaraldehyde.
Filter Cassette and Cyclone Holder:
  1. Filter Cassette Holder
    Part Number: 225-1
    $33.00 /EA
    Filter Cassette Holder, accommodates two or three-piece 25 or 37-mm cassettes with or without a cyclone, clips to a worker's collar; includes 3 feet of 1/4-inch ID Tygon tubing and 25-mm adapter ring.
Pumps:
  1. AirChek TOUCH Pump
    Part Number: 220-5000TC
    $1,208.00 /EA
    AirChek® TOUCH AirChek Pump with Li-Ion battery pack and screwdriver set. Requires charging cradle and power supply. Connectivity to PC requires 877-93. Low flows from 5 to 500 ml/min require a low flow kit. AirChek TOUCH pumps contain Li-Ion batteries and are subject to special shipping regulations. AirChek TOUCH requires ¼-inch ID tubing.

This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.