SKC OSHA / NIOSH Sampling Guide for Carbon dioxide
| Chemical Information | ||
Carbon dioxide 124-38-9 | GC-TCD | Qualitative: 200 ppm (using a 1 ml sample loops) Quantitative: 500 ppm |
| Sampling Parameters | |||
TWA 5000 ppm | 2 - 5 L | 10 - 50 ml/min | 4 - 8 hr |
| Important Information Additional bag sizes/volumes are available on the SKC website. Select based on your application. |
SKC Sampling Equipment
FlexFoil PLUS Sample Bag w/Single Stainless Steel Septum Fitting, 1L, 10PkPart Number: 253-01$238.00 /PKFlexFoil® PLUS 1-liter Sample Bag with single stainless steel septum fitting.
FlexFoil Sample Bag w/Single Stainless Steel Septum Fitting, 1L, 10PkPart Number: 263-01$229.00 /PKStandard FlexFoil® 1-liter Sample Bag with single stainless steel septum fitting.
Pocket Pump TOUCH PumpPart Number: 220-1000TC$806.00 /EAPocket Pump® TOUCH with Li-Ion battery and screwdriver. Requires charger. Requires 877-94 to use Bluetooth with PC.
This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.
Validate your login