SKC OSHA / NIOSH Sampling Guide for Hexavalent chromium
| Chemical Information | ||
Hexavalent chromium 18540-29-9 | IC-UV | |
| Sampling Parameters | |||
TWA | |||
| Important Information use 225-5-37 for strandard surfaces. Use 225-1822 on rough surfaces. |
SKC Sampling Equipment
Filter, PVC, GLA-5000 w/o Support Pad, 5.00 µm, 37mm, 100PkPart Number: 225-5-37$89.95 /PKPVC Filter, 5.0 µm, 37-mm, no support pad included, GLA-50000.
Filter, Quartz (Tissuquartz) w/o Support Pad, Heat Treated, Binder-Free, Low Metal Background, 432µm thick, 37mm, 25PkPart Number: 225-1822$89.95 /PKQuartz (Tissuquartz) Filter, 37-mm, 432 µm thick, heat-treated, binder-free, no support pad included, low metal background; for elemental/organic carbon, DPM, and trace-level contaminants, for sampling up to 1999°F (1093°C).
This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.
Validate your login