SKC OSHA / NIOSH Sampling Guide for Crotonaldehyde, mixture of cis and trans

SKC OSHA / NIOSH Sampling Guide for Crotonaldehyde, mixture of cis and trans
Chemical Information
Crotonaldehyde, mixture of cis and trans
4170-30-3
DPP
Undetermined
Sampling Parameters

TWA 2 ppm
C/STEL

1 @2ppm - 49 L

100 - 200 ml/min

varies

SKC Sampling Equipment

Impinger:
  1. Midget Impinger, Glass, 25 ml, Fritted Nozzle
    Part Number: 225-36-2
    $151.00 /EA
    Glass Midget Impinger, 25 ml, with fritted nozzle
Impinger Trap:
  1. Impinger Trap, Glass, Each
    Part Number: 225-22
    $82.00 /EA
    Glass Trap for Glass Midget Impingers, for area sampling, can be used with or without sorbent.
Pumps:
  1. Pocket Pump TOUCH Pump
    Part Number: 220-1000TC
    $806.00 /EA
    Pocket Pump® TOUCH with Li-Ion battery and screwdriver. Requires charger. Requires 877-94 to use Bluetooth with PC.

This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.