SKC Passive Sampling Guide for Acetone

SKC Passive Sampling Guide for Acetone
Chemical Information
Acetone
67-64-1
OSHA TWA1000 C/STEL
ACGIH TLV500 C/STEL
 
Sampling Parameters

15.2

60

8

Method Parameters

GC-FID
 

90.2
105

Full
 

Carbon disulfide (2 ml)
10% 1-Propanol in carbon disulfide (2ml) (Universal D-solvent)

1303
 

Important Information
STEL sampling, 7.5 to 30 min, see report.

SKC Sampling Equipment

Passive Sampler:
  1. VOC Chek 575 Passive Sampler, for ppm-Level Organic Vapors, Anasorb 747, 5Pk
    Part Number: 575-002
    $98.00 /PK
    VOC Chek® 575 Passive Sampler for ppm-level organic vapors, contains Anasorb 747, 500 mg. Larger package sizes are available. See 575-002A, 575-002B, 575-002C.

This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.