SKC Passive Sampling Guide for Carbon tetrachloride

SKC Passive Sampling Guide for Carbon tetrachloride
Chemical Information
Carbon tetrachloride
56-23-5
OSHA TWA10 C/STEL25 C
ACGIH TLV2 C/STEL25 C
 
Sampling Parameters

14.1

8 hrs

7 days

Method Parameters

GC-FID

Internal

Carbon disulfide (2 ml)

 

SKC Sampling Equipment

Passive Sampler:
  1. ULTRA® Passive Sampler for sub-ppb level VOCs and SVOCs, Anasorb GCB1, 5Pk
    Part Number: 690-101
    $348.00 /PK
    ULTRA® Passive Sampler for sub-ppb level VOCs and SVOCs, prefilled with Anasorb GCB1 (comparable to Carbopack B), 60/80 mesh, 370 mg in each compartment, with built-in blank.

This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.