SKC Passive Sampling Guide for Methanol (methyl alcohol)

SKC Passive Sampling Guide for Methanol (methyl alcohol)
Chemical Information
Methanol (methyl alcohol)
67-56-1
OSHA TWA200 C/STEL250
ACGIH TLV200 C/STEL250
 
Sampling Parameters

1.2

15

8

Method Parameters

GC-FID
 

101
93.8

Partial
 

50:50 Carbon Disulfide: Dimethyl Formamide (2 ml)
10% 1-Propanol in carbon disulfide (2ml) (Universal D-solvent)

1895
 

SKC Sampling Equipment

Passive Sampler:
  1. VOC Chek 575 Passive Samplers for Methanol, Anasorb 747, 5Pk
    Part Number: 575-007
    $99.00 /PK
    Passive Sampler, for Methanol, Anasorb 747, 500 mg, includes secondary diffusion barrier.

This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.