Sorbent Tubes, 2 Porapak-T Tubes

Please allow your location to be read or register an account with SKC Inc. to view pricing

Part Number: 226-116A

Questions?

Sorbent Tubes, 2 Porapak-T Tubes Overview

Sorbent Tube, 2 Porapak-T tubes, both 6 x 40-mm size, 1-section tube 25 mg sorbent with glass open tube ends and Glass Wool/Glass Wool separators and 1-section tube 75 mg sorbent with Glass Wool/Glass Wool separators, 20/40 mesh, fits Type B tube cover 10 sets

Attributes

Tube Type : Solvent Extraction
Sorbent : Porapak
Sorbent Coating : No
Number of Sections : 1
Tube Material : Glass

Meet NIOSH, OSHA, ASTM, EPA, and HSE specifications

Your single source for U.S. and UK methods
Made with high-quality, low-background sorbents
SKC thorough quality control ensures sorbents and tubes meet high standard
Accurate sorbent weights
Consistent method-specified mesh size and separators
Uniform back pressure
Accurate, repeatable results
Large batch production of Anasorb® CSC Lot 2000 charcoal to ensure availability for many years
Validation of reliability
- Specified in OSHA, NIOSH, ASTM, and EPA methods
- Used by health and safety professionals around the world for compliance and consulting
Sorbent background certification available online (see Certificates of Analysis)
Technical support from scientists
Hundreds of sorbent tubes for standard and specialty applications delivered quickly from stock

226-01 drawing

TechTips logo

	Consult the method or the SKC Air Sampling Guide to determine the appropriate sorbent tube to use for the chemical being sampled.
	Just before sampling, use a scorer/breaker tool to uniformly break the ends of the sorbent tube to a 2 mm diameter or half the diameter of the tube body.
	Keep the tube in a vertical position during sampling to prevent the possibility of channeling that can lead to undersampling.
	The arrow on the tube indicates air flow direction and should point to the tube holder and pump. If no arrow is present, the smallest section should be near the tube holder.
	Ship the sample to a laboratory as soon as possible; avoid excessive heat and rough handling.