SKC HSE Sampling Guide for Aromatic carboxylic acid anhydrides (see individual compounds)
| Chemical Information | |
Aromatic carboxylic acid anhydrides (see individual compounds) | HPLC MDHS 62/2 |
| Sampling Parameters | |||
SKC Sampling Equipment
IOM Sampler, Conductive Plastic w/Transport Clip and CoverPart Number: 225-70A$89.00 /EAIOM Sampler and Cassette, in conductive plastic with transport clip and cover.
Filter, Glass Fiber, Type GF/A, 1.60 µm, 25mm, 100PkPart Number: 225-58F$39.95 /PKGlass Fiber Filter, , Type GF/A, 1.6 µm, 25-mm, binder-free.
Sorbent Tube, Tenax TA, 6 x 70-mm size, 2 sections, 30/15 mg sorbent, 20/35 mesh, 50PkPart Number: 226-35$214.00 /PKSorbent Tube, Tenax TA, 6 x 70-mm size, 2 sections, 30/15 mg sorbent, 20/35 mesh. Tube Ends: Glass Sealed Separators: Foam/Glass Wool/Glass Wool
This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.
Validate your login