SKC HSE Sampling Guide for Hydrogen cyanide
| Chemical Information | |
Hydrogen cyanide 74-90-8 | ISE MDHS 56/3 |
| Sampling Parameters | |||
| 40 | 200 | 3 |
| Important Information The filter is not analysed |
SKC Sampling Equipment
Midget Impinger, Glass, 25 ml, Fritted NozzlePart Number: 225-36-2$151.00 /EAGlass Midget Impinger, 25 ml, with fritted nozzle
Impinger Trap, Glass, EachPart Number: 225-22$82.00 /EAGlass Trap for Glass Midget Impingers, for area sampling, can be used with or without sorbent.
IOM Sampler, Conductive Plastic w/Transport Clip and CoverPart Number: 225-70A$89.00 /EAIOM Sampler and Cassette, in conductive plastic with transport clip and cover.
Filter, MCE w/o Support Pad, 0.80 µm, 25mm, 100PkPart Number: 225-1930$34.95 /PKMCE Filter, 0.8 µm, 25-mm, no support pad included, recommended for use with IOM Sampler.
This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.
Validate your login