SKC OSHA / NIOSH Sampling Guide for Soot (see elemental carbon)

SKC OSHA / NIOSH Sampling Guide for Soot (see elemental carbon)
Chemical Information
Soot (see elemental carbon)
 
TOA-FID
0.2µg/filter portion
Sampling Parameters

TWA
C/STEL

varies

varies

varies

SKC Sampling Equipment

Filter in Preloaded Cassette:
  1. Filter Cassette, Quartz, for NIOSH 5040, 37mm, 3-Piece Clear Styrene Traditional Style Cassette, Banded, 50Pk
    Part Number: 225-401
    $199.95 /PK
    Quartz Filter, 37-mm (for Diesel Particulate Matter), preloaded in a 3-piece clear plastic cassette; meets NIOSH Method 5040 specification, pre-banded.
Cyclone:
  1. GS-3 Respirable Dust Cyclone, 10mm w/37mm Cassette Adapter
    Part Number: 225-100
    $90.00 /EA
    GS-3 Respirable Dust Cyclone, 10 mm, with 37-mm cassette adapter, conductive plastic construction.
Filter Cassette and Cyclone Holder:
  1. Filter Cassette Holder
    Part Number: 225-1
    $33.00 /EA
    Filter Cassette Holder, accommodates two or three-piece 25 or 37-mm cassettes with or without a cyclone, clips to a worker's collar; includes 3 feet of 1/4-inch ID Tygon tubing and 25-mm adapter ring.

This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.