SKC OSHA / NIOSH Sampling Guide for PM2.5
| Chemical Information | ||
PM2.5 | GR | |
| Sampling Parameters | |||
TWA | 9 ml/min | 24 hrs | |
SKC Sampling Equipment
Sioutas Cascade ImpactorPart Number: 225-370$728.00 /EASioutas Cascade Impactor, for Leland Legacy® air sampling pump at 9 L/min; separates and collects airborne particles in five size ranges: > 2.5 µm, 1.0 to 2.5 µm, 0.50 to 1.0 µm, 0.25 to 0.50 µm, and < 0.25 µm
Filter, PTFE w/o Support Pad, Unlaminated, 0.50 µm, 25mm, 100PkPart Number: 225-17-21$174.95 /PKPTFE Filter, unlaminated, 0.5 µm, 25-mm, no support pad included.
Filter, PTFE w/PMP Support Ring, 2.00 µm, 37mm, 50PkPart Number: 225-1709$274.95 /PKPTFE Filter with PMP support ring, 2.0 µm, 37-mm, no support pad included.
This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.
Validate your login