Pocket Pump TOUCH without BLE with Charger
Pocket Pump TOUCH without BLE with Charger Overview
Pocket Pump TOUCH without BLE with Charger includes pump and single charger (USB cable and wall cube)
The Pocket Pump TOUCH personal air sample pump provides low flows from 20 to 500 ml/min for gas and vapor sampling. Pocket Pump TOUCH features touch screen operation and PC-based DataTrac Pro Software, powerful Li-Ion battery for 20+ hours run time at 500 ml/min, exhaust port for direct filling of sample bags, AC Adapter/charger, and more in a miniature pump that fits in your pocket. Pocket Pump TOUCH is UL Listed for intrinsic safety.
Performance Profile
Flow Range in Constant Flow Mode | 20 to 500 ml/min |
Compensation Range in Constant Flow Mode | 20 to 500 ml/min up to 20 inches water back pressure |
Pressure Range in Constant Pressure Mode | 1 to 20 inches water |
Flow Control System | Corrects for changes in back pressure, temperature, and atmospheric pressure |
Power | Removable rechargeable lithium-ion (Li-Ion) battery, 3.7 V, 2.6 Ah, 9.6 Wh or USB charger |
Run Time (Li-Ion) | 20+ hrs at 500 ml/min up to 20 inches water back pressure, extended run times available with charger Tested using 37-mm 0.8-μm MCE filter with new pump and battery. Pump performance may vary. |
Charging Time (varies with battery capacity and level of discharge) |
< 10 hrs (< 4.5 hrs to 80%) |
Accuracy | Constant flow control: ± 5% of set-point or ± 3 ml/min, whichever is higher Atmospheric pressure: ± 0.3 in Hg Temperature: ± 1.0 C Real-time clock: ± 1% Constant pressure mode: Reading ± 0.5 inch water |
Temperature Ranges | Operating: 32 to 113 F (0 to 45 C) Charging: 32 to 113 F (0 to 45 C) Storage: -4 to 113 F (-20 to 45 C) |
Humidity Range | < 95% RH, non-condensing |
Altitude | Corrects flow for changes in temperature (32 to 113 F [0 to 45 C]) and ambient pressure up to 15,000 feet (4,572 meters) above and down to 2,300 feet (701 meters) below sea level |
Flow Fault | After 3 to 10 seconds of restricted flow, pump stops running, elapsed time stops, status LEDs flash red, and pump displays fault icon. After 20 seconds in fault, auto-restart is attempted up to 5 times unless full airflow is restored prior to that. If full airflow is not corrected during 5 restart attempts within 5 minutes, the pump ends the run and displays Sample Summary. |
Display Type/Parameters | High-contrast backlit LCD/Time, date, battery status, flow rate, sample volume, temperature, atmospheric pressure, back pressure, programmed run remaining time, and elapsed run time |
User Interface | Eight-area capacitive touch screen with auto-dim and locking options |
Dimensions | 3.2 x 3.8 x 1.5 in (8.1 x 9.7 x 3.8 cm) |
Weight | 8.3 oz (235 gm) |
Certifications/Markings | ![]() |
Case Material | IP 64-rated case, polycarbonate with rubberized anti-static overmolding |
Communications with PC | Low-energy Bluetooth, requires DataTrac Pro for Pocket Pump TOUCH USB Bluetooth Adapter (Cat. No. 877-94) |
Tubing | Requires 1/4-in ID tubing |
- Pump Flow Rate : 20 to 500 ml/min
- PC Compatible : Yes
- Programable : Yes
- Intrinsic Safety : Yes
- Battery Type (Power) : Li-Ion
- Approx Run Time : 20
Product Document
Pocket Pump TOUCH Brochure (PDF)
Pocket Pump TOUCH Installation/Operation Caution Guide (PDF)
Pocket Pump TOUCH Sample Pump non-BLE version Operating Instructions (PDF)
Pocket Pump TOUCH non-BLE version Startup Guide (PDF)
Technical Note: SKC Sample Pump Lithium-Ion Battery Pack Characteristics and Maintenance (PDF)
Technical Note: SKC Sample Pump Lithium-Ion Battery Packing and Shipping Requirements (PDF)
SDS Lithium-Ion Rechargeable Battery (PDF)
210-1000 PocketPump Touch ATEX Certificate
210-1000 Pocket Pump TOUCH UN Certificate
210-1000 Pocket Pump TOUCH UL Certificate
Pocket Pump TOUCH Sample Pump 210-1000TC and Battery Charger 220-300 Declaration of Conformity