Express Buy

Toggle Nav
Search
  • Change Company
  • My Account
  • My Wish List ()
  • Sign In
  • Compare
  • Create an Account
Menu
Account

SKC OSHA / NIOSH Sampling Guide for Oil mist (total aerosol)

SKC OSHA / NIOSH Sampling Guide for Oil mist (total aerosol)
Chemical Information
Oil mist (total aerosol)
 
GR
 
Sampling Parameters

TWA 5 mg/m3
C/STEL

varies

2000 ml/min

varies

Important Information
NON 46: Am. Ind. Hyg. Assoc. J. 57 (12)1149-1152 (1996) 'Exposures to Inhalable and Total Oil Mist Aerosol by Metal Machining Shop Workers.'

SKC Sampling Equipment

IOM Particulate Sampler:
  1. IOM Sampler, Conductive Plastic w/Transport Clip and Cover
    IOM Sampler, Conductive Plastic w/Transport Clip and Cover
    Part Number: 225-70A
    $89.00 /EA
    Add to Wish List Add to Compare
    IOM Sampler and Cassette, in conductive plastic with transport clip and cover.
Filter:
  1. Filter, PVC, GLA-5000 w/o Support Pad, 5.00 µm, 25mm, 100Pk
    Filter, PVC, GLA-5000 w/o Support Pad, 5.00 µm, 25mm, 100Pk
    Part Number: 225-5-25
    $49.95 /PK
    Add to Wish List Add to Compare
    PVC Filter, 5.0 µm, 25-mm, no support pad included, GLA-5000; recommended for use with IOM or Button Samplers.
Pumps:
  1. AirChek TOUCH Pump
    AirChek TOUCH Pump
    Part Number: 220-5000TC
    $1,208.00 /EA
    Add to Wish List Add to Compare
    AirChek® TOUCH AirChek Pump with Li-Ion battery pack and screwdriver set. Requires charging cradle and power supply. Connectivity to PC requires 877-93. Low flows from 5 to 500 ml/min require a low flow kit. AirChek TOUCH pumps contain Li-Ion batteries and are subject to special shipping regulations. AirChek TOUCH requires ¼-inch ID tubing.

This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility of the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.